Touchscreen-controlled purification for lube, hydraulic, gear and turbine oil.
The Oil Purification System (OPS) is Karroter's flagship configurable purifier, built for plants that need one system to handle several oil types and a larger working volume. It's suitable for lube oil, hydraulic oil, gear oil, turbine oil and other synthetic or mineral-based oils.
The centrifuge filtration stage is mandatory in every OPS build; a mechanical filter stage is optional, added when finer polishing is required. Every unit can be specified with a Touchscreen HMI Control panel, plus optional particle counter and moisture sensor for in-line condition monitoring.
| Parameter | Specification |
|---|---|
| Oil types supported | Lube, hydraulic, gear, turbine, synthetic & mineral oils |
| Maximum oil volume | Up to 3,000 L |
| Maximum viscosity | Up to 220 cSt |
Exact specifications vary by application. Share your oil type, viscosity and sump volume with our team for a confirmed sizing.
Lube oil, hydraulic oil, gear oil, turbine oil, and other synthetic or mineral-based industrial oils, up to 220 cSt viscosity.
No. The centrifuge filtration stage is mandatory in every OPS; the mechanical filter stage is optional and is added when you need finer polishing beyond centrifugal separation.
Yes — the OPS can be specified with an optional particle counter and moisture sensor alongside the standard touchscreen HMI control.
Zero-consumable centrifugal separation that removes solid contaminants down to 1 micron without filter elements to replace.
View specifications →Removes sub-micron sludge and varnish from hydraulic oil to NAS 4 cleanliness, with automatic leak-sensing shutoff.
View specifications →Strips dissolved water and gases from oil down to 200 ppm, protecting hydraulics, turbines and transformers from moisture damage.
View specifications →Send your oil type, flow rate and sump volume for a tailored quote.